SURFCOIL® PROFESSIONAL GRADE SMT INDUCTORS AND TRANSFORMERS
Engineering Bulletin SG-890
Wideband Transformers with 2 Windings: 4.5 x 4.5 x 2.8 mm - GLSW Series
APPLICATIONS
- RF circuits
- Mobile radio
- Satellite TV
- Cordless phones
FEATURES
- Compact design
- Suitable for automatic insertion
- For reflow and vapor phase soldering
- Ceramic base
- Terminals are formed from the ends of the coil windings, eliminating solder joints between the coil and the terminals which could open from the heat of circuit assembly.
SPECIFICATIONS
- Operating Temperature Range: -40°C to +125°C
- Soldering Heat Resistance: 230°C, 5 s
| Impedance (ohms) |
Turns Ratio |
3dB Band Limits (MHz) |
Loss at 20 MHz (dB) max |
Model Number |
|---|---|---|---|---|
| 50 : 50 | 1 : 1 | 4 - 2000 | 0.5 | GLSW4M202 |
Carrier and Reel Specifications
Typical Insertion Loss
All dimensions are in/mm.
Unless otherwise specified, the tolerance on all dimensions is ±0.004/0.1.
SURFCOIL® PROFESSIONAL GRADE SMT INDUCTORS AND TRANSFORMERS
Engineering Bulletin SG-890 Contents
- Introduction
- Surface Mount Air Coil – GLSM Series: 3.7 x 3.1 x 3.2 and 7.1 x 3.1 x 3.2 mm
- Surface Mount Inductor – GLST Series: 5.6 x 4.0 x 3.1 mm
- Surface Mount Power Inductor – GLSP Series: 4.8 x 4.0 x 5.0 mm
- Surface Mount Power Inductor – GLSX Series: 8.5 x 8.0 x 5.5 mm
- Surface Mount Inductor – GLSH Series: 11.9 x 9.6 x 5.2 mm
- SMD Tunable RF Coil – GLSV & GLSA Series: 5.0 x 5.0 x 5.1 mm
- Surface Mount Transformers – GLSG Series: 4.4 x 4.4 x 3.3 mm
- Surface
Mount Transformers – GLSZ Series: 4.5 x 3.4 x 3.1 mm
- Surface Mount Wideband Transformers
- Transformer with 2 Windings – GLSW Series: 4.5 x 4.5 x 2.8 mm
- Transformer with 2 Windings and Tap – GLSB Series: 4.5 x 4.5 x 2.8 mm
- Balun Transformer – GLSU Series: 4.5 x 4.5 x 2.8 mm
- Power Splitter – GLSD Series Couplers: 4.5 x 4.5 x 2.8 mm
- Directional Couplers
- GLSL Series: 4.5 x 4.5 x 2.8 mm
- GLSN Series: 5.7 x 5.7 x 3.9 mm
- GLSY Series: 6.5 x 5.7 x 3.9 mm
- 180°
Hybrid Coupler – GLSJ Series: 6.5 x 5.7 x 3.9 mm
- SMD Toroidal-Core Transformers
and Chokes
- Transformer with 2 Windings – GLSF Series: 10.8 x 8.8 5.5 mm
- Transformer with 3 Windings – GLSK Series: 10.8 x 8.8 5.5 mm
- Current Compensated Toroidal-Core Choke – GLSC Series: 10.8 x 8.8 x 5.5 mm
- Current
Compensated Toroidal-Core Transformer – GLSE Series: 17.8 x 14.3
x 8.8 mm
- Carrier and Reel Specifications