SURFCOIL® PROFESSIONAL GRADE SMT INDUCTORS AND TRANSFORMERS
Engineering Bulletin SG-890
SMD Tunable RF Coil: 5.0 x 5.0 x 5.1 mm - GLSV and GLSA Series
APPLICATIONS
- RF circuits
- Telecommunications
- Mobile radio
FEATURES
- Compact design
- Suitable for automatic insertion
- For reflow and vapor phase soldering
- Wide frequency range
- Max 5 connections
SPECIFICATIONS
- Inductance Range: 14 nH - 680 µH
- Operating Temperature Range: -40°C to +85°C
- Power Loss at 40°C: approx. 100 mW max
- Soldering Heat Resistance: 260°C, 5 s
- Frequency Range: 0.5 - 300 MHz
All dimensions are in/mm. Unless otherwise specified, the tolerance on all dimensions is ±0.004/0.1.
Typical Q vs. Inductance
Typical Q vs. Frequency
Standard Values (1 Winding)
Induct. (µH) |
Induct. Test Freq. (MHz) |
Frequency Range (MHz) |
Adjust. Range |
Q min |
Q Test Freq. (MHz) |
Pin Connection | Turns |
Model Number |
|
|---|---|---|---|---|---|---|---|---|---|
| A | B | ||||||||
| 0.047 | 10 | 50 - 200 | ±3.0% | 38 | 150 | 4 | 2 | 3 1/4 | GLSV47N00 |
| 0.056 | 10 | 50 - 200 | 6.0% | 40 | 150 | 2 | 4 | 3 3/4 | GLSV56N00 |
| 0.068 | 10 | 50 - 200 | ±3.0% | 45 | 150 | 2 | 4 | 3 3/4 | GLSV68N00 |
| 0.082 | 10 | 50 - 200 | ±3.5% | 38 | 150 | 2 | 4 | 4 3/4 | GLSV82N00 |
| 0.10 | 10 | 50 - 200 | ±4.0% | 48 | 100 | 2 | 4 | 4 3/4 | GLSVR1000 |
| 0.12 | 10 | 50 - 200 | ±5.0% | 32 | 100 | 2 | 4 | 5 3/4 | GLSVR1200 |
| 0.15 | 10 | 50 - 200 | ±5.0% | 42 | 100 | 2 | 4 | 5 3/4 | GLSVR1500 |
| 0.18 | 10 | 50 - 200 | ±5.0% | 40 | 100 | 4 | 2 | 6 1/4 | GLSVR1800 |
| 0.22 | 10 | 20 - 150 | ±7.5% | 45 | 70 | 4 | 2 | 7 1/4 | GLSVR2200 |
| 0.27 | 10 | 20 - 150 | ±7.5% | 35 | 70 | 2 | 4 | 7 3/4 | GLSVR2700 |
| 0.33 | 10 | 20 - 150 | ±7.5% | 35 | 70 | 2 | 4 | 8 3/4 | GLSVR3300 |
| 0.39 | 10 | 20 - 150 | ±7.5% | 40 | 70 | 2 | 4 | 9 3/4 | GLSVR3900 |
| 0.47 | 10 | 20 - 150 | ±7.5% | 45 | 70 | 4 | 2 | 11 1/4 | GLSVR4700 |
| 0.56 | 10 | 20 - 150 | ±7.5% | 42 | 70 | 2 | 4 | 12 3/4 | GLSVR5600 |
| 0.68 | 10 | 10 - 100 | ±7.5% | 45 | 50 | 4 | 2 | 14 1/4 | GLSVR6800 |
| 0.82 | 10 | 10 - 100 | ±7.5% | 42 | 50 | 2 | 4 | 15 3/4 | GLSVR8200 |
| 1.0 | 10 | 2 - 40 | ±7.5% | 42 | 50 | 4 | 2 | 17 1/4 | GLSV1R000 |
| 1.2 | 10 | 2 - 40 | ±7.5% | 45 | 20 | 4 | 2 | 19 1/4 | GLSV1R200 |
| 1.5 | 10 | 2 - 40 | ±7.5% | 45 | 20 | 4 | 2 | 21 1/4 | GLSV1R500 |
| 1.8 | 10 | 2 - 40 | ±7.5% | 45 | 20 | 2 | 4 | 23 3/4 | GLSV1R800 |
| 2.2 | 1 | 2 - 40 | ±5.0% | 45 | 20 | 2 | 4 | 27 3/4 | GLSV2R200 |
| 2.7 | 1 | 2 - 40 | ±5.0% | 40 | 20 | 4 | 2 | 30 1/4 | GLSV2R700 |
| 3.3 | 1 | 2 - 40 | ±5.0% | 35 | 20 | 4 | 2 | 34 1/4 | GLSV3R300 |
| 3.9 | 1 | 2 - 40 | ±5.0% | 35 | 10 | 2 | 4 | 34 3/4 | GLSV3R900 |
| 4.7 | 1 | 2 - 40 | ±5.0% | 35 | 10 | 2 | 4 | 38 3/4 | GLSV4R700 |
| 5.6 | 1 | 2 - 40 | ±5.0% | 35 | 10 | 2 | 4 | 41 3/4 | GLSV5R600 |
| 6.8 | 1 | 1 - 10 | ±5.0% | 30 | 5 | 4 | 2 | 44 1/4 | GLSV6R800 |
| 8.2 | 1 | 1 - 10 | ±5.0% | 23 | 5 | 4 | 2 | 48 1/4 | GLSV8R200 |
| 10.0 | 1 | 1 - 10 | ±5.0% | 23 | 5 | 4 | 2 | 55 1/4 | GLSV10000 |
| 12.0 | 1 | 1 - 10 | ±5.0% | 23 | 5 | 4 | 2 | 61 1/4 | GLSV12000 |
| 15.0 | 0.5 | 1 - 10 | ±5.0% | 25 | 5 | 4 | 2 | 67 1/4 | GLSV15000 |
Special Values
Induct. (µH) |
Induct. Freq. (MHz) |
Freq. Range (MHz) |
Adjust. Range |
Q min |
Q Test Freq. (MHz) |
Pin Connection | Turns | Turns A-E |
Fig. |
Model Number |
|||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | C | D | E | 1 | 2 | |||||||||
| 0.014 | 10.0 | 100 - 200 | ±3% | 65 | 200 | 4 | 2 | -- | -- | -- | 1 1/4 | -- | -- | 1 | GLSA14N00 |
| 0.092 | 10.0 | 50 - 200 | ±5% | 40 | 100 | 4 | 2 | -- | -- | -- | 4 1/4 | -- | -- | 1 | GLSA92N00 |
| 0.117 | 1.0 | 20 - 200 | ±4% | 40 | 100 | 2 | 4 | -- | -- | -- | 4 3/4 | -- | -- | 1 | GLSAR1170 |
| 0.137 | 10.0 | 20 - 150 | ±5% | 35 | 100 | 4 | 2 | -- | -- | -- | 5 1/4 | -- | -- | 1 | GLSAR1370 |
| 0.17 | 1.0 | 20 - 150 | ±5% | 25 | 70 | 2 | 5 | 4 | 3 | 1 | 4 1/2 | 6 3/4 | 2 1/4 | 4 | GLSAR1700 |
| 0.24 | 1.0 | 20 - 150 | ±5% | 30 | 70 | 1 | 5 | 4 | 2 | -- | 7 1/4 | 5 1/4 | -- | 3 | GLSAR2400 |
| 0.24 | 1.0 | 20 - 150 | +7/-4% | 30 | 70 | 1 | 5 | 4 | 2 | -- | 7 1/4 | 3 1/4 | -- | 3 | GLSAR2401 |
| 0.24 | 13.0 | 20 - 150 | ±5% | 30 | 35 | 1 | 5 | -- | -- | -- | 7 1/4 | -- | -- | 1 | GLSAR2402 |
| 0.75 | 10.0 | 20 - 150 | ±5% | 25 | 30 | 1 | 2 | 5 | 4 | -- | 14 3/4 | 15 1/4 | -- | 3 | GLSAR7500 |
| 0.85 | 1.0 | 20 - 150 | ±7.5% | 45 | 45 | 2 | 5 | 4 | 3 | 1 | 16 1/2 | 2 3/4 | 8 1/4 | 4 | GLSAR8500 |
| 0.97 | 13.0 | 10 - 100 | ±5% | 40 | 35 | 4 | 2 | 1 | 5 | -- | 16 | 2 | -- | 3 | GLSAR9700 |
| 1.0 | 1.0 | 10 - 100 | -7.5% | 25 | 45 | 2 | 5 | -- | -- | 1 | 18 1/2 | -- | 9 1/4 | 2 | GLSA1R000 |
| 1.18 | 2.0 | 10 - 100 | ±5% | 22 | 40 | 2 | 4 | 5 | 1 | 3 | 18 3/4 | 3 3/4 | 14 1/4 | 4 | GLSA1R180 |
| 1.2 | 1.0 | 10 - 100 | +16% | 38 | 20 | 4 | 2 | 1 | 5 | -- | 20 1/4 | 4 1/4 | -- | 3 | GLSA1R200 |
| 1.3 | 1.0 | 10 - 100 | ±7.5% | 30 | 10 | 5 | 1 | -- | -- | -- | 19 3/4 | -- | -- | 1 | GLSA1R300 |
| 1.35 | 0.3 | 10 - 100 | ±5% | 20 | 26 | 2 | 4 | 5 | 1 | 3 | 18 3/4 | 9 3/4 | 9 1/2 | 4 | GLSA1R350 |
| 1.79 | 1.0 | 1 - 15 | +3/-11% | 25 | 12 | 2 | 4 | 5 | 1 | -- | 22 3/4 | 4 3/4 | -- | 3 | GLSA1R790 |
| 2.0 | 0.2 | 5 - 50 | ±5% | 35 | 21 | 4 | 2 | -- | -- | -- | 25 1/4 | -- | -- | 1 | GLSA2R000 |
| 2.15 | 13.0 | 5 - 40 | ±7.5% | 45 | 35 | 1 | 5 | -- | -- | -- | 26 | -- | -- | 1 | GLSA2R150 |
| 2.5 | 13.0 | 5 - 40 | ±7.5% | 40 | 35 | 1 | 5 | -- | -- | -- | 29 | -- | -- | 1 | GLSA2R500 |
| 3.0 | 0.2 | 5 - 40 | ±5% | 30 | 21 | 2 | 4 | -- | -- | 3 | 30 3/4 | -- | 9 1/2 | 2 | GLSA3R000 |
| 3.1 | 0.2 | 5 - 40 | ±5% | 32 | 21 | 4 | 2 | -- | -- | -- | 32 | -- | -- | 1 | GLSA3R100 |
| 9.0 | 0.1 | 1 - 10 | +21/-3% | 18 | 1.6 | 2 | 4 | 5 | 1 | -- | 55 3/4 | 11 3/4 | -- | 3 | GLSA9R000 |
| 19.6 | 0.1 | 1 - 10 | +10/-1% | 24 | 5.0 | 4 | 2 | -- | -- | -- | 78 1/4 | -- | -- | 1 | GLSA19R60 |
| 28.0 | 0.1 | 1 - 10 | +4/-16% | 18 | 1.8 | 2 | 4 | 5 | 1 | -- | 92 3/4 | 18 3/4 | -- | 3 | GLSA28000 |
| 32.0 | 1.0 | 1 - 10 | +20% | 14 | 1.0 | 1 | 5 | 4 | 2 | -- | 108 1/4 | 36 1/4 | -- | 3 | GLSA32000 |
| 125.0 | 0.1 | 0.5 - 2 | ±7.5% | 18 | 1.0 | 4 | 2 | -- | -- | -- | 208 | -- | -- | 1 | GLSA12100 |
| 150.0 | 0.03 | 0.5 - 2 | +10/-1.5% | 16 | 1.0 | 5 | 1 | 4 | 2 | -- | 217 3/4 | 85 1/4 | -- | 3 | GLSA15100 |
| 390.0 | 0.1 | 0.5 - 2 | ±7.5% | 20 | 1.0 | 1 | 5 | -- | -- | -- | 365 | -- | -- | 1 | GLSA39100 |
| 500.0 | 0.1 | 0.5 - 2 | ±7.5% | 12 | 0.5 | 4 | 2 | -- | -- | -- | 426 | -- | -- | 1 | GLSA50100 |
| 680.0 | 0.05 | 0.5 - 2 | ±7.5% | 12 | 0.45 | 4 | 2 | -- | -- | -- | 490 | -- | -- | 1 | GLSA68100 |
Carrier and Reel Specifications
SURFCOIL® PROFESSIONAL GRADE SMT INDUCTORS AND TRANSFORMERS
Engineering Bulletin SG-890 Contents
- Introduction
- Surface Mount Air Coil – GLSM Series: 3.7 x 3.1 x 3.2 and 7.1 x 3.1 x 3.2 mm
- Surface Mount Inductor – GLST Series: 5.6 x 4.0 x 3.1 mm
- Surface Mount Power Inductor – GLSP Series: 4.8 x 4.0 x 5.0 mm
- Surface Mount Power Inductor – GLSX Series: 8.5 x 8.0 x 5.5 mm
- Surface Mount Inductor – GLSH Series: 11.9 x 9.6 x 5.2 mm
- SMD Tunable RF Coil – GLSV & GLSA Series: 5.0 x 5.0 x 5.1 mm
- Surface Mount Transformers – GLSG Series: 4.4 x 4.4 x 3.3 mm
- Surface
Mount Transformers – GLSZ Series: 4.5 x 3.4 x 3.1 mm
- Surface Mount Wideband Transformers
- Transformer with 2 Windings – GLSW Series: 4.5 x 4.5 x 2.8 mm
- Transformer with 2 Windings and Tap – GLSB Series: 4.5 x 4.5 x 2.8 mm
- Balun Transformer – GLSU Series: 4.5 x 4.5 x 2.8 mm
- Power Splitter – GLSD Series Couplers: 4.5 x 4.5 x 2.8 mm
- Directional Couplers
- GLSL Series: 4.5 x 4.5 x 2.8 mm
- GLSN Series: 5.7 x 5.7 x 3.9 mm
- GLSY Series: 6.5 x 5.7 x 3.9 mm
- 180°
Hybrid Coupler – GLSJ Series: 6.5 x 5.7 x 3.9 mm
- SMD Toroidal-Core Transformers
and Chokes
- Transformer with 2 Windings – GLSF Series: 10.8 x 8.8 5.5 mm
- Transformer with 3 Windings – GLSK Series: 10.8 x 8.8 5.5 mm
- Current Compensated Toroidal-Core Choke – GLSC Series: 10.8 x 8.8 x 5.5 mm
- Current
Compensated Toroidal-Core Transformer – GLSE Series: 17.8 x 14.3
x 8.8 mm
- Carrier and Reel Specifications