GLYC Series (0603 Size)

Features:

• High Current Ratings
• Low DC resistance
• Suitable for Ultra High Frequencies
• Ideal choke for telecommunications devices
• Suitable for wave flow soldering, infrared and vapor phase reflow (typically over 90% coverage).
• Withstands soldering temperatures without damage
• Fully encapsulated and thermally cycled for stability and highest reliability
• Carrier and reel packaging is standard

Specifications:

• Temperature range -40°C to +85°C
• Rated Current is determined by either or both of the following conditions:
  1. Self heating raises SURFCOIL temperature 20°C
  2. Inductance value reduced by 10% from saturation effect

Inductance (nH) 100 MHz	Standard Inductance Tolerance	Model No.	SRF (GHz) min	Q min (100 MHz)	Rated Current (A)	DCR (mOhm) max
2.2	± 10%	GLYC2N210	6.0	8	2.1	30
2.7	± 10%	GLYC2N710	5.0	8	2.1	30
3.3	± 10%	GLYC3N310	5.0	8	2.1	40
3.9	± 10%	GLYC3N910	5.2	9	2.1	40
4.7	± 10%	GLYC4N710	4.8	9	2.1	50
5.6	± 10%	GLYC5N610	4.6	9	2.1	55
6.8	± 10%	GLYC6N810	4.0	9	1.9	55
8.2	± 10%	GLYC8N210	3.5	9	1.7	60
10	± 10%	GLYC10N10	2.8	9	1.4	65
12	± 10%	GLYC12N10	2.5	9	1.3	80
15	± 10%	GLYC15N10	2.2	9	0.9	100
18	± 10%	GLYC18N10	2.0	9	0.8	120
22	± 10%	GLYC22N10	1.8	9	0.7	150

Carrier and Reel Specifications

GLYC Series (0603 Size)

All dimensions are in/mm.

Engineering Bulletin SG-800G Contents

• Features and Specifications
• SURFCOIL® Selection Guide
• SURFCOIL® Kit Directory
• GL06, GL12, GL15, and GL25 - Air Core Inductors
• GLTZ Series - Laser Cut 0201 Size
• GLZ Series - Laser Cut 0402 Size
• High Current, Low DCR GLZP Series - Laser Cut 0402 Size
• GLY Series - Laser Cut 0603 Size
• High Current Low DCR GLYC Series - Laser Cut 0603 Size
• High Frequency Nonmagnetic GLX Series - Wirewound 0805 Size
• High Current GLW Series - Molded Bobbin Wound 1008 Size
• Standard GLU Series - Molded Bobbin Wound 1008 Size
• Nonmagnetic High Frequency GLU Series - Molded Bobbin Wound 1008 Size
• Standard GLA Series - Molded Bobbin Wound 1210 Size
• High Power Low DCR Shielded GLAC Series - Molded Bobbin Wound 1210 Size
• Nonmagnetic High Frequency GLA Series - Molded Bobbin Wound 1210 Size
• Shielded GLC Series - Molded Bobbin Wound 1210 Size
• High Current Shielded GLD Series - Molded Bobbin Wound 1210 Size
• High Current, Low DCR, Shielded GLBP Series - Molded Bobbin Wound 1812 Size
• GLB Series - Molded Bobbin Wound 1812 Size
• Carrier and Reel Specifications