Microwave Sapphire PISTONCAP® Trimmer Capacitors
Type F - Flange Mount
Figure 1 |
Figure 2 |
|
|
|||||||||
| Capacitance (pF) |
Q min (250 MHz) |
A1 | B1 | C* | D | K* | A2 | Model No. Fig. 1 |
Model No. Fig. 2 |
|
|---|---|---|---|---|---|---|---|---|---|---|
| min | max | |||||||||
| 0.3 | 1.2 | 4000 | 0.20 5.2 |
0.17 4.4 |
0.075 1.9 |
0.09 2.3 |
0.145 3.68 |
0.23 5.8 |
GUF1R200 | GNF1R200 |
| GUF1R250 | GNF1R250 | |||||||||
| 0.4 | 2.5 | 3000 | 0.20 5.2 |
0.17 4.4 |
0.118 3.00 |
0.09 2.3 |
0.185 4.70 |
0.23 5.8 |
GWF2R500 | GNF2R500 |
| GWF2R550 | GNF2R550 | |||||||||
| 0.6 | 4.5 | 2000 | 0.33 8.4 |
0.25 6.5 |
0.118 3.00 |
0.15 3.8 |
0.185 4.70 |
0.31 7.9 |
GWF4R500 | GNF4R500 |
| GWF4R550 | GNF4R550 | |||||||||
| 0.8 | 8.0 | 1000 | 0.57 14 |
0.41 11 |
0.118 3.00 |
0.25 6.4 |
0.185 4.70 |
0.47 12 |
GWF8R000 | GNF8R000 |
| GWF8R050 | GNF8R050 | |||||||||
*Tolerance is ±0.005 in/0.1 mm.
Dimensions are in/mm. Unless otherwise specified, tolerance is ±0.01/0.3, except
slot tolerance is +0.001/0.03, -0.002/0.05 and lead thickness tolerance is ±0.002/0.05.
Engineering Bulletin SG-207 Contents
- Features and Specifications
- Part Numbering System
- Type C - PC Mount
- Type F - Flange Mount
- Type L - Horizontal Surface Mount
- Type N - Leadless
- Type R - Reverse Lead Mount
- Type V - Vertical Surface Mount
- Type Y- Vertical Surface Mount - Wide Lead